-If a dialog box appeared on the computer screen, close it. Disconnect the USB cable, and restore the connection after a short while.
/
Total play time is too long
- The playlist cannot be converted when its total playback time exceeds 2 hours and 30 min- utes. Reduce the number of scenes in the playlist.
Unable to recognize the data
-You transferred data to the camcorder recorded in a different television system (PAL or SECAM).
Unable to recover data
-Could not recover a corrupted file. Save your recordings ( 
111) and initialize the memory
using the [Complete Initialization] option ( 
38).
Messages Related to the Optional
If an error message appears while the camcorder is connected to the optional
Cannot read the disc. Check the disc.
-During disc recording mode, this message can appear when a commercially available DVD disc (a DVD disc containing movies, software, etc.) or an 8 cm mini DVD disc is inserted. Replace with a brand new disc.
-During disc playback mode, this message can appear when a commercially available DVD disc or a brand new DVD disc is inserted. Replace with an AVCHD disc created with the DVD burner.
Close the memory card slot cover
-The memory card slot cover is open. Close the cover after correctly inserting the memory card.
Connect the compact power adapter
-The camcorder is being powered by the battery pack. Connect the compact power adapter to the camcorder.
Disc access failure. Check the disc.
-There was an error when reading the disc or attempting to write onto it.
-This message can appear also if condensation has formed ( 
167). Wait until the DVD burner dries completely before resuming use.
-The disc may be dirty or not correctly loaded. Try removing the disc and reinserting it after cleaning the recording surface with a clean, soft cloth. If the problem persists, replace with a different disc.
Error reading the data
- Check that the USB cable was not accidentally disconnected.
160 Additional Information