2Adjust the viewfinder.
Keep the LCD panel closed to use the viewfinder and adjust the dioptric adjustment lever as necessary.
3Fasten the grip belt.
Adjust the grip belt so that you can reach the zoom lever with your index finger, and the start/stop button with your thumb.
Getting Started | 21 |
|
|
|
3 Insert the battery holder. |
|
|
|
|
|
|
|
| |
|
| E |
| |
Using the Wireless Controller |
|
|
|
I.AF sensor
NOTES
To make use of the full capabilities of the instant AF function (
31), be careful not to obstruct the I.AF sensor.
Point the controller at the camcorder’s remote sensor when you press the buttons.
NOTES
The wireless controller may not work properly when the remote sensor is situated under strong light sources or direct sunlight.
If the wireless controller does not work, check that [WL.REMOTE] is not set to [OFF 
]
(
37). Otherwise, replace the battery.
Preparations
The Wireless Controller
Inserting the Battery
(Lithium Button Battery CR2025)
Tab
1Press the tab in the direction of the arrow and pull out the battery holder.
2Place the lithium button battery with the + side facing up.
Adjusting the LCD Screen
Rotating the LCD Panel
Open the LCD panel 90 degrees. You can rotate the panel 90 degrees downward.
180°
90°
You can rotate the panel 180 degrees toward the lens (allowing the subject to monitor the LCD screen while you use the viewfinder). Rotating the panel 180