Trouble? 73

Additional Information

Trouble?

TroubleshootingE

If you have a problem with your camcorder, refer to this checklist. Consult your dealer or a Canon Service Center if the problem persists.

Power Source
ProblemSolution

 

 

 

 

 

 

 

 

 

 

• Camcorder will not turn on.

Battery pack is exhausted. Replace or charge the battery pack.

18

 

• The camcorder switches off

 

 

 

 

 

by itself.

 

 

 

 

 

• The cassette compartment

 

 

 

 

 

Attach the battery pack correctly.

 

 

 

 

cover will not open.

 

 

 

 

 

 

 

 

 

The cassette compartment stopped half way while

inserting/removing a tape.

Use the compact power adapter.

The LCD/viewfinder switches on and off.

Battery pack will not charge.

Charge the battery pack in temperatures between 0 °C and

 

40 °C (32 °F and 104 °F).

 

 

Battery packs become hot with use and may not charge. The

 

charging will start once the battery pack temperature is below

 

 

40 °C (104 °F).

 

 

The battery pack is damaged. Use a different battery pack.

 

Check that the compact power adapter is correctly connected to

 

 

the camcorder.

 

Recording/Playback

 

 

 

 

 

Problem

Solution

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Buttons will not work.

Turn on the camcorder.

 

 

 

 

 

 

 

Load a cassette.

19

 

Abnormal characters appear on

Disconnect the power source and reconnect it after a short time.

 

the screen. The camcorder

If the problem still persists, disconnect the power source and

 

 

 

 

does not operate properly.

press the RESET button with a pointed item. Pressing the

 

 

 

 

 

 

 

 

 

 

RESET button resets all settings.

 

 

 

 

 

 

 

” flashes on the screen.

Load a cassette.

19

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

” flashes on the screen.

Battery pack is exhausted. Replace or charge the battery pack.

18

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

” flashes on the screen.

Condensation is detected. See reference page.

82

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The lens cover is not

Turn the camcorder off and then on again.

 

completely open.

 

 

 

 

 

“ ” flashes red on the screen.

The camcorder malfunctions. Consult a Canon Service Center.

 

“REMOVE THE CASSETTE”

Remove the cassette and reinsert it.

19

 

appears on the screen.

 

 

 

 

 

The wireless controller will not

Set [WL.REMOTE] to [ON].

37

 

work.

 

 

 

 

 

The battery of the wireless controller is exhausted. Replace the

21

 

 

 

 

 

 

 

 

 

 

 

 

 

 

battery.

 

 

 

 

Information Additional