70Connecting to a Printer

print by selecting 2-, 4-, 9- or [16-UP]. You can also use this setting to print on the specially designed photo stickers sheets.

-When the paper size is set to [A4] you can print 4 copies on the same sheet by selecting [4-UP].

 Canon PIXMA/SELPHY CP Printers:

-When the paper size is set to [CREDITCARD] you can print multiple small copies on a single print by selecting 2-, 4-, or [8-UP]. You can also use [8-UP] to print on the specially designed photo stickers sheets.

-When the paper size is set to [10 x 14.8 cm] or [9 x 13 cm] you can print 2 or 4 copies on the same sheet by selecting [2-UP] or [4-UP].

-When you are using the specially designed wide-sized photo paper you can set the paper size to [DEFAULT] and print 2 or 4 copies on the same sheet by selecting [2-UP] or [4-UP].

Printing after Changing the Print Settings

1 Press SET .

•The print setting menu appears.

•Depending on the printer, the message “BUSY.” may appear before the camcorder displays the print setting menu.

2In the print settings menu, select

() the setting you want to change and press SET .

3Select () the desired setting option and press SET .

4Select () [PRINT] and press

SET .

•Printing starts. The print setting menu disappears when the printing is completed.

•To continue printing, select another still image.

TO CANCEL THE PRINTING

Press SET while printing. A confirmation dialog appears. Select [OK] and press SET . With Canon’s PictBridge compatible printers, the printing will stop immediately (even if not completed) and the paper will be fed through.

PRINTING ERRORS

If an error occurs during the printing process, an error message appears ( 78).

-Canon’s PictBridge compatible printers: Resolve the error. When printing does not resume automatically, select [CONTINUE] and press SET . If [CONTINUE] cannot be selected, select [STOP], press SET and retry printing. Refer also to the printer’s instruction manual for details.

-If the error still persists and printing does not restart, disconnect the USB cable and turn off the camcorder and the printer. After a short

while, turn them on again, set the camcorder to

mode and restore the connection.

WHEN YOU HAVE FINISHED PRINTING

Disconnect the cable from the camcorder and printer and turn off the camcorder.

IMPORTANT

The following still images may not be correctly printed with a PictBridge compatible printer.

- Images created or changed on a computer and transferred to the memory card.

- Images recorded with the camcorder but edited on a computer.

- Images whose file names were changed. - Images not recorded with this camcorder.

Observe the following precautions during printing:

- Do not turn off the camcorder or the printer. - Do not change the position of the / switch.

- Do not disconnect the USB cable. - Do not remove the memory card.

If the message “BUSY.” does not disappear, disconnect the USB cable and restore the connection after a short while.

Trimming Settings

Set the paper size and page layout before changing the trimming settings.

1In the print setting menu, select

() [TRIMMING] and press SET .