68Connecting to a Printer

MENU

( 22)

MENU

CARD OPERATIONS

TRANSFER ORDER

Bring () the cursor to the image you want to

MENU ** transfer and press SET .* Repeat this step to set

transfer orders for additional images.

* appears on images marked with a transfer order. Press SET to cancel the

transfer order.

**After closing the menu the camcorder returns to the index screen.

Erasing All Transfer Orders

( 10)

MENU

( 22)

MENU CARD OPERATIONS

TRANS.ORD.ALL ERASE

MENU YES

Connecting to a Printer

Printing Still Images – Direct Print

The camcorder can be connected to any PictBridge compatible printer. You can mark the still images you want to print and set the desired number of copies as a print order ( 71).

Canon printers: SELPHY CP and SELPHY DS printers and PIXMA printers marked with the PictBridge logo.

Connecting the Camcorder to the Printer

( 10)

1Insert the memory card containing the still images you want to print.

2Turn on the printer.

3Connect the camcorder to the printer using the USB connection

–connection type 1 ( 64)– shown in the previous section PC Connection Diagrams.

• appears and changes to .

•The (print/share) button lights up and the current print settings will be displayed for approx. 6 seconds.

IMPORTANT

If continues to flash (for more than 1 minute) or if does not appear, the camcorder is not correctly connected to the printer. In such case, disconnect the USB cable and turn off the camcorder and the printer. After a short while, turn them on again, set the camcorder to mode and restore the connection.

NOTES

 will appear for images that cannot be printed.