Playback 29
POINTS TO CHECK
Stop the playback before using this function.
Press END SEARCH .
•“END SEARCH” appears.
•The camcorder rewinds/fast forwards the tape, plays back the last few seconds of the recording and stops the tape.
•To cancel the search press END SEARCH again.
NOTES
End search cannot be used once you remove the cassette.
If there are blank sections between recordings, or sections recorded in different standards (HDV/DV) on the same tape, the end search may not work correctly.
NOTES | E |
|
Recordings shorter than 1 minute per date/ |
| |
|
| |
time zone cannot be located with this function. |
|
|
Date search may not function if the date, time |
|
|
or data code are not correctly displayed. |
|
|
If there are sections recorded in different |
|
|
standards (HDV/DV) on the same tape, the date |
|
|
search may not work correctly. |
|
|
Viewing Still Images
( 10)
Functions Basic
Locating Scenes by Recording Date
You can locate the change of the date/ time zone with the date search function.
Press or on the wireless controller.
•Press more than once to search for further date changes (up to 10 times).
•To cancel the search press STOP .
1Holding the lock button pressed down, set the POWER switch to PLAY.
2Move the / switch to (memory card).
3Press + or - to move between the images.
IMAGE JUMP
You can jump ahead to a specific image without having to browse all images one by one.