FAX: 763-559-5236
INON will return the product, shipping prepaid to you in the United States.
5) Upon receipt, carefully inspect the product.
Note: For non-warranty service, INON will evaluate product and advise cost of any necessary repair or service.
Note: We highly recommend you obtain insurance to cover any non-warranty issue, and to protect against risk of loss or damage to your other equipment.
Note: The company names, product names and trademarks used in this Manual are the property of their respective owners.
Measures to prevent accidental flooding
Before explaining how to use the many features of the D-180 we recommend first understanding some essential practices that will greatly reduce the main causes of accidentally flooding the D-180. The D-180 is waterproof due to a rubber O-ring that seals the internal circuitry from the elements. There is only one user serviceable O-ring: the Battery Box O-ring. This O-ring requires frequent inspection and care to ensure its watertight integrity. Since most flooding occurs due an O-ring related problem we strongly recommend you to inspect the O-ring (and clean, grease or replace as necessary) each time before using the strobe. Equally important are O-ring contact surfaces. Check the contact surfaces for contaminants or scratches. We cannot stress enough the importance of making O-ring related inspection and maintenance a habit and essential part of your pre-dive equipment preparation routine.
O-Ring inspection locations
Inspect and maintain these three points:
Battery Box O-ring
Battery Box O-ring groove
Battery Box outer cap O-ring contact surface
O-ring inspection methods
These are the essential factors to ensure proper O-ring function:
The O-ring itself
O-ring contact surfaces
O-ring grooves
If O-ring is properly seated in groove
Grease
INON D-180 Manual | 7 |
Version 1. October 4, 2003 | |
Copyright 2002, 2003 by INON America, Inc. | All rights reserved. |