There are two main types of overhaul:

1) Normal Overhaul

Replace any exposed O-rings

Replace any O-rings supporting moving parts Test all controls, moving parts

Pressure test

2) Full Overhaul Replace all O-rings

Test all controls, moving parts Pressure test

O-ring and other degradable part life can vary considerably due to type of use, frequency of use, maintenance method, storage conditions etc. Inon will conduct incoming product inspection of each overhaul request and determine at its discretion whether Normal or Full Overhaul is necessary.

Of course, Inon can conduct overhaul and any time based on specific instructions from the user, but in general Inon recommends normal overhaul once per year, and full overhaul every three years.

INON D-180 Manual

50

Version 1. October 4, 2003

 

Copyright 2002, 2003 by INON America, Inc.

All rights reserved.