Optical Slave Cable
Optical D Cable/Cap W7 Set (with Clear Photo System Film)
Optical D Cable and fixtures for mounting on PT-018. Possible to install a second Optical D Cable for dual strobe use.
Optical D Cable/Cap W4 Set
Optical D Cable/Cap W3 Set
Optical D Cable/Cap W6 Set
Connector parts for transmitting light between external strobesOptical Slave Cable (S and L sizes)Attach harness end to other external master strobe. Attach connector end to D-180 Optical Sensor. Light from master strobe transmitted directly to D-180 slave.
“S” (small, for strobes with diameters of approx. 6 – 10cm) for master strobes: Inon Z-220/220S,D-180/D180S, Nikon SB-105,
Sea & Sea YS25, YS30, YS60, YS90, YS120, Ikelite DS-50, DS-125, SS-50.“L” (large, for strobes with diameters of approx. 10 – 15cm) for master strobes: Inon Z-22, Nikon SB-104, Sea & Sea YS350, YS300, Ikelite SS-100, SS-200, SS-400.
Optical D Slave CableConnect “Optical D Slave Cable” between a D-180 or Z-220 strobe (Master Strobe) and an Inon Z-220 or Z-22 strobe (Slave Strobe). Light from the D-180/Z-220 Focus Light will link to and allow functioning of the slave strobe’s Focus Light and Target Laser.
Optical D Slave Cable
INON D-180 Manual | 52 |
Version 1. October 4, 2003 | |
Copyright 2002, 2003 by INON America, Inc. | All rights reserved. |