Canon iPF8400SE , 586, Roll paper cannot be inserted into the paper feed slot

6
If the paper is not visible, lift the Ejection Guide, re-
move the Roll Holder, and clear the paper jam from
below.
After removing the paper, make sure there are no
other scraps of paper in the printer, and then lower
the Ejection Guide.
7
If the Carriage is on the left, move the Carriage to the
right until it stops.
Important
•Always move the Carriage to the right side. If the Carriage is on the left, a Carriage error may occur
when you turn on the printer.
8
Lower the Release Lever and close the Top Cover.
9 Turn the printer on. (See "Turning the Printer On and Off.") ➔P.17
Roll paper cannot be inserted into the paper feed slot
Roll paper cannot be inserted into the paper feed slot
Cause Corrective Action
The roll paper is warped. Straighten out curls and reload the roll.
Paper is jammed by the paper feed slot. Remove the jammed paper.
(See "Clearing Jammed Roll Paper.") ➔P.581
(See "Clearing a Jammed Sheet.") ➔P.584
Roll paper cannot be inserted into the paper feed slot iPF8400SE
User's Guide
Troubleshooting Problems Regarding Paper
586