The operating instructions mentioned here are partial abstracts from the Operating Instruction Manual. The page numbers of the Operating Instruction Manual remain as in the manual.
WARNING
•Dangerously high voltages are present inside the TV.
•Operate the TV only between 110 – 240 V AC.
SECTION 1
GENERAL
Using Your New TV
Getting Started
Step 1 
Connect the antenna
If you wish to connect a VCR, see the “Connecting a VCR” diagram below.
KV-2199XDK RM-952
– 8 –
Do not open the cabinet and the rear cover of the TV. Refer servicing to qualified personnel.
To prevent fire or shock hazard, do not expose the TV to rain or moisture.
Do not install the TV in a confined space, such as a bookcase or
Do not block the ventilation openings of the TV.
Install the TV in a stable position. Do not allow children to climb onto it.
Do not operate the TV if any liquid or solid object falls into it. Have it checked immediately by qualified personnel only.
Clean the TV with a dry and soft cloth.
Do not use benzine, thinner, or any other chemicals to clean the TV. Do not scratch the picture tube.
Rear of TV
IEC connector (not supplied)
Antenna cable (not supplied)
or
: Signal flow
Connecting a VCR
To watch the video, press É 
(see page 12).
Rear of TV
Antenna cable (not supplied)
To antenna
output VCR
To ù
(antenna)
Do not pull the power cord to disconnect the TV. Pull it out by the plug.
Disconnect the power cord during lightning storms or if you are not going to use the TV for several days.
Do not plug in too many appliances to the same power socket. Do not damage the power cord.
Do not install the TV in hot, humid or excessively dusty places.
AUDIO VIDEO
VIDEO IN
VIDEO OUT
To video and audio outputs
1
To É 1 
(video input)
: Signal flow
Audio/Video cable | (yellow) |
(not supplied) | (black) |
2 | 4 |
