– 11 –
Presetting channels manually
1 | Press SELECT until |
| “MANUAL PROGRAM” |
| appears. |
2 | Press + or |
3 | Press PROGR +/– or the |
| number buttons until the |
| desired program number |
| appears. |
4 | Press + or – until the |
| desired channel picture |
| appears. |
5 | Press SELECT. |
To change the TV system setting
SELECT 
| MANUAL PROGRAM |
|
|
|
|
|
|
| Using |
| 1 | 2 | 3 | YourNewTV |
| VHF LOW B/G |
|
|
|
PROGR |
|
|
|
|
or | 4 | 5 | 6 |
|
7 | 8 | 9 |
| |
|
| |||
| 0 |
|
| |
|
|
|
| 1 |
SELECT 
Presetting channels (continued)
To change the color system setting
If the color is abnormal when receiving programs through the
ù(antenna) terminal or the É (video input) jack
(1) Press SELECT until “COL SYS” appears.
COL SYS : AUTO
(2)Press + or – to select the appropriate color system until the color is optimal.
AUTO 
PAL 
SECAM 
NTSC 3.58 
NTSC 4.43
| Tip |
| • Normally set “COL SYS” to “AUTO”. |
Skipping program numbers | |
1 | Press PROGR +/– or the number buttons until the unused or unwanted |
| program number appears. |
2 | Press SELECT until “MANUAL PROGRAM” appears. |
3 | Press + or |
4 | Press PIC MODE. |
5 | Press SELECT. |
To preset the skipped program number again
Preset the channel automatically or manually.
If the picture or sound is abnormal when receiving programs through the ù (antenna) terminal.
(1) Press SELECT until “TV SYS” appears.
TV SYS: B/G
(2)Press + or – to select the appropriate TV system until the picture or sound quality is optimal.
B/G 
D/K
continued
Using Your New TV 9
Tip
•You can also use SELECT and ü+/– on the TV to preset channels and skip program numbers.
To use the fine tuning (FINE) function
The fine tuning (FINE) function may help to reduce the following problems: double images and lines moving across the TV screen.
You can use the fine tuning function as below:
(1)Select the program number you want to adjust.
(2)Press SELECT until “MANUAL PROGRAM” appears on the screen.
(3)Press + or – on the remote control once.
(4)Press 
to display “FINE” on the screen.
(5)Press + or – continuously until the above problems are minimized. The + or – icon on the screen flashes while tuning.
(6)Press SELECT to return to normal screen.
