Canon KV-2199XDK service manual Ych Tlv

KV-2199XDK

RM-952

4Y separation axis correction magnet adjustment.		Blue	Red
1.	Receive the cross-hatch signal and adjust [PICTURE] to [MIN]	Neck assy	Neck assy
	and [BRIGHTNESS] to [STANDARD] .
2.	Adjust the Y separation axis correction magnet on the neck
	assembly so that the horizontal lines at the top and bottom of
	the screen are straight.	Red	Blue
		VM1 board	VM1 board

Note

1. The Red and Blue magnets should be equally far from the

horizontal center line.

2. Do not separate the Red and Blue magnets too far. (Less than

8 mm)

(2)Dynamic Convergence Adjustment Preparation:

∙Before starting this adjustment, adjust the horizontal static convergence and the vertical static convergence

R B	B
	R

YCH TLV

on DY

YCHTLV

– 24 –