Installation

Positioning the Projector

This projector is designed to project on a flat projection surface and can be focused from 3.3’(1.0m) - 25.3’(7.7m). Refer to the figure and the table below for the screen size and the distance between the projector and the screen.

A : B = 9 : 1

 

25.3’ (7,7m)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(Inch Diagonal)

 

16,1’ (4,9m)

 

 

300”

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

12.5’ (3.8m)

 

 

 

 

 

 

 

Max. Zoom

 

 

 

 

 

 

 

190”

 

 

190”

 

 

 

 

 

 

 

 

8,2’ (2,5m)

 

 

 

 

 

 

 

 

 

 

 

 

150”

 

 

 

 

Min. Zoom

 

A

 

 

 

 

3.3’ (1.0m)

100”122” 95”

40”62”

(Center)

B

Screen Size

 

40”

 

100”

150”

190”

300”

(W x H) mm

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

813 x 610

 

2032 x 1524

3048 x 2286

3861 x 2896

6096 x 4572

4 : 3 aspect ratio

 

 

 

 

 

 

 

 

 

 

Zoom (min)

 

5.2' (1.6m)

 

13.1' (4.0m)

19.7' (6.0m)

25.3' (7.7m)

–––––

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Zoom (max)

 

3.3' (1.0m)

 

8.2' (2.5m)

12.5' (3.8m)

16.1' (4.9m)

25.3' (7.7m)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Note:

The brightness in a room has a great influence on picture quality. It is recommended to limit ambient lighting in order to obtain the best image.

The values shown above are approximate and may vary from the actual size.

Adjustable Feet

Projection angle can be adjusted up to 11.9 degrees with the adjustable feet.

1

Lift the front of the projector and pull upward the feet lock

 

latches on both sides of the projector.

2

Release the feet lock latches to lock the adjustable feet and

 

rotate the adjustable feet to adjust the position and tilt.

3

To retract the adjustable feet, lift the front of the projector

and pull and undo the feet lock latches.

Keystone distortion of the projected image can be adjusted by menu operation. (p24, 41)

Feet Lock Latches

Adjustable Feet

15