Video Input

Input Source Selection (Component, RGB Scart 21-Pin)

Direct Operation

Choose Computer 1 by pressing the INPUT button on the top control or press the COMPUTER button on the remote control unit.

Before using these buttons, correct input source should be selected through menu operation as described below.

Menu Operation

1

Press the MENU button and the On-Screen Menu will

 

appear. Press the Point 7 8 button to move the red frame

 

pointer to the Input Menu icon.

2

Press the Point d button to move the red arrow pointer to

 

Computer 1, and then press the SET button. The Source

 

Select Menu will appear.

3

Move the pointer to the correct input source and then press

 

the SET button.

 

When the input source is coming from video

Component

 

 

equipment connected to the RGB IN-1/

 

 

 

 

COMPONENT IN terminal with a Component-

 

 

VGA Cable, select Component.

INPUT button

Computer 1

Computer 2 ✳

Video

COMPUTER button

Computer 1

Computer 2 ✳

✳See Note on the bottom of this page.

Input Menu icon

Input Menu

Move the pointer (red arrow) to Computer 1 and press the SET button.

Computer

1

Source Select Menu

Move the pointer to Component or RGB (Scart) and press the SET button.

RGB (Scart)

When the input source is coming from video

 

equipment connected to the RGB IN-1/

 

 

COMPONENT IN terminal with a Scart-VGA

 

Cable, select RGB (Scart).

✔Note:

•Component-VGA Cable and Scart-VGA Cable are optionally supplied. See page 60 for order.

•Computer 2 is not displayed when the RGB IN-2/RGB OUT terminal is used as Monitor out. (p43)

35