Video Input

Progressive

Interlaced video signal can be displayed in a progressive picture.

Off . . . .Not activated.

L1 . . . . .Select “L1” for an active picture.

L2 . . . . .Select “L2” for a still picture.

Film

This function is effective on 3:2 pulldown video source. With this function On, the projector reproduces pictures faithful to the original film quality.

Reset

Resets all adjustment to their previous levels.

Store icon

Store

To store the adjustment data, move the red frame pointer to the Store icon and press the SET button. The message “OK?” will appear. Select [Yes] to store the adjustment data.

To select this manual adjustment, select Custom by pressing the IMAGE button or through the Image Select Menu (p37).

Quit

Closes the Image Adjust Menu.

✔Note:

•Progressive cannot be selected when 480p, 575p, 720p, 1035i, or 1080i is selected.

•Film can only be activated in any state shown below.

1.When selecting NTSC, NTSC4.43 PAL-M or 480i in the AV System Menu (p36).

2.When selecting Auto and signal is NTSC, NTSC4.43, PAL-M(Composite) or 480i(Component) in the AV System Menu (p36).

•3:2 Pulldown or Telecine transfer is the process of changing images from film mode to video mode. While film runs at 24 frames per second (fps), NTSC television signals (or video) have a run rate of 30fps so the 24 fps film needs to be speeded up to 30fps and transferred using a proper field pattern to get the best film-like images.

“OK?” message Move the pointer to [Yes] and then press the SET button.

39