Canon MD205, MD216, MD215 Audio Dubbing, Locate the point where you want to start dubbing audio

5Connected device: Begin recording when the scene you wish to copy appears. Stop recording when copying is complete.

6This camcorder: Stop playback.

NOTES

•We recommend powering the camcorder using the compact power adapter.

•When recording to a VCR using an analog connection –connection type or ( 47)–, the quality of the edited tape will be lower than the original.

•When recording to a digital video recorder using the DV terminal –connection type ( 47)–:

-If the picture does not appear, disconnect the DV cable and restore the connection after a short while or turn the camcorder off and then on again.

-Proper operation cannot be guaranteed for all digital devices equipped with a DV terminal. If the operation does not work, use the AV terminal.

Audio Dubbing

You can add sound to a recording using the built-in or an external microphone.

( 19)

POINTS TO CHECK

You can only dub audio on tapes recorded

in SP mode with [ 12bit] audio

( 39). This function is operated with the wireless controller.

STOP

REW	PLAY	FF
PAUSE	STOP
PAUSE	SLOW
AUDIO DUB.	ZERO SET	TV SCREEN
	MEMORY

AUDIO DUB.

1Locate the point where you want to start dubbing audio.

Before locating the starting point, you can also set the zero set

memory ( 33) at the point where you want the audio dubbing to end. The camcorder will automatically stop audio dubbing at that point.

2Start playback and immediately press PAUSE .

3Press AUDIO DUB. .

“AUDIO DUB.” and appear.

4Press PAUSE to begin dubbing. Speak into the microphone.

49