LCD Messages
See the table below when the LCD displays error messages.
Common
Message | Description | Action |
CHANGE REG’D SIZE | When the machine prints the | Set the paper size to <LTR>, |
| reports or lists, the paper | <LGL>, or <A4> and load |
| size is set to a size other | paper of the same size. For |
| than <LTR>, <LGL>, or | the TX report or RX report, |
| <A4>. | the machine automatically |
|
| prints the report(s) which |
|
| was stored in memory. |
|
|
|
CHECK PRINTER | A problem has occurred in | Reset the machine by |
| the printer. | opening the front cover and |
|
| then closing it. If the |
|
| message persists, unplug |
|
| the machine from the power |
|
| supply and contact Canon |
|
| Customer Care Center. |
|
|
|
CLOSE COVER | The front cover is not closed | Check the front cover, and |
FRONT COVER | completely. | make sure that it is |
|
| completely closed. |
Troubleshooting