Message

 

Description

 

Action

 

LOST IMAGE

The data in memory was lost

The error is automatically

 

 

when the machine was

released after two seconds,

 

 

turned on.

and the machine

 

 

 

 

automatically prints out the

 

 

 

 

lost report that shows the

 

 

 

 

records still existing in the

 

 

 

 

activity report.

 

 

 

 

 

 

MEMORY FULL

The number of the

Divide the document and

 

 

 

scanned document that

copy each part separately.

 

 

 

can be stored in memory

 

 

 

 

 

reached the maximum.

 

 

 

 

– The machine’s memory is

 

 

 

 

 

full of scanned documents

 

 

 

 

 

when you use the sort

 

 

 

 

 

copy function.

 

 

 

 

 

 

 

 

 

OUT OF TONER

The toner cartridge is

Replace with a new toner

 

CHANGE TONER

 

almost empty.

 

cartridge.

 

 

If <CONT. PRINTING> is

If you want to continue

 

 

 

set to <OFF> in the <RX

 

printing without replacing

 

 

 

SETTINGS> of the <FAX

 

the toner cartridge, set

 

 

 

SETTINGS> menu, the

 

<CONT. PRINTING> to

 

 

 

Fax printing and printing

 

<ON> in the <RX SET-

 

 

 

reports are interrupted

 

TINGS> of the <FAX SET-

 

 

 

when the <OUT OF

 

TINGS> menu. However,

 

 

 

TONER/CHANGE

 

the toner cartridge is

 

 

 

TONER> appears.

 

almost empty, so you

 

 

 

 

 

should replace the toner

Troubleshooting

 

 

 

 

cartridge with a new one.

 

 

 

 

 

OUTPUT TRAY FULL

The output tray is full of

Remove the printouts from

 

 

 

paper.

the output tray.

 

 

 

 

 

 

11-9