Q Is the machine installed in a stable location?
A Install the machine in a proper location. (See “Installation,” on p. xiv.)
Copies are too dark or too light.
Q Is the exposure adjusted correctly?
AAdjust the exposure correctly using [Exposure]. (See “Adjusting the Exposure (Density),” on p.
Q Is the machine in the toner saver mode?
ASet <TONER SAVER MODE> to <OFF> in <COMMON SETTINGS> of the Menu. (See <3. TONER SAVER MODE> of “Menu Descriptions.” on p.
The printouts are partly missing or shaded when you make copies on heavy paper.
Q Is the paper type set correctly?
ASelect <HEAVY PAPER> or <HEAVY PAPER H> in <PAPER TYPE> in <PAPER SETTINGS> of the Menu. (See “Specifying the Paper Type,” on p.
The printouts are missing when you make copies on rough paper.
Q Is the paper type set correctly?
ASelect <TRANSPARENCY> in <PAPER TYPE> in <PAPER SETTINGS> of the Menu. (See “Specifying the Paper Type,” on p.
The printous are missing when you make copies using the 2 on 1 copy function.
Q Are the documents
ABe sure to use two sheets of
The edges of copies are dirty when you make copies.
Q Is the paper size set correctly?
ASpecify the appropriate paper size in <PAPER SIZE> in <PAPER SETTINGS> of the Menu. (See “Specifying the Paper Size,” on p.
Troubleshooting
9
Print Quality Problems |