Loading banner paper

NOTE

•Always leave an extra sheet at the end of the banner—just in case the type runs over.

•Printing on banner paper may require considerable amounts of ink so use new ink tanks if necessary.

•For best print results on banner paper, use light design patterns.

Follow this procedure to load banner paper in the multi-purpose tray:

1Make sure the paper thickness lever is set to the right.

•For details, see p. 3-6.

2Lower the tray extension on the multi-

purpose tray.

3Cut the banner paper to the required length and place it behind the machine on a flat surface. Then insert the first sheet in the multi-purpose tray q and adjust the paper guide A to the width of the sheet leaving an !/8 inch (1 mm) gap between the paper guide and edge of the sheet w.

•Make sure the sheets behind the machine are aligned with the first sheet.

4Set your computer to print on banner paper.

•Allow the paper to flow over the edge of the table as it exits the machine.

w

q

A

3-10

Print media handling

Chapter 3