Inserting/removing a memory card

Inserting a memory card

To use a memory card, you will need to insert it into a PC card adapter before inserting it in the card slot. Do not attempt to insert it into the card slot without a PC card adapter.

1Make sure the machine is on.

•If not, press [ON/OFF].

2Insert the memory card into the PC card

adapter.

3 Insert the PC card adapter all the way

 

into the card slot on the front of the

 

operation panel.

A

• The indicator light A turns on when the machine is in photo print mode or when writing from the computer.

NOTE

•If the memory card cannot be read, check that:

–the PC card adapter containing the memory card is inserted all the way into the card slot.

–the PC card adapter containing the memory card was not removed while being read.

–you are using a compatible memory card.

–your memory card contains photographs.

Removing a memory card

CAUTION

•Do not remove the memory card or turn off the machine when the indicator light is blinking as this may damage the data in the memory card.

1Check that the indicator light is not

blinking q, then press [ON/OFF]

w

to turn the machine off w.

 

• If you have been writing to a memory card in Windows 2000, wait ten seconds before turning off the machine.

q

8-2

Photo printing from a memory card

Chapter 8