Cannot write to the memory card (write protect error displayed in Windows).

1.Is the machine in photo print mode and card protection set to <ON>?

Windows 98/ME: Switch to a different mode and set the <CARD PROTECT> setting to <OFF> ( p. 11-3). Then disconnect and reconnect the USB cable.

Windows 2000/XP: Switch to a different mode and set the <CARD PROTECT> setting to <OFF> ( p. 11-3). If necessary, disconnect then reconnect the USB cable.

2.If a delayed write failed error is displayed in Windows 2000

This error appears if you do not disconnect then reconnect the USB cable after setting <CARD PROTECT> to <ON> or switching to photo print mode. Disconnect then reconnect the USB cable after

setting <CARD PROTECT> to <ON> or switching to photo print mode.

CAUTION

•In Windows 2000, when you move from the hard disk to the memory card, writing will fail and the original file may be lost.

3.If you have connected in Windows XP

The date and time of access is written in the Windows XP preview and if <CARD PROTECT> is set to <ON> or photo print mode is selected, a write protect error may be displayed. Disconnect then reconnect the USB cable.

Removable disk does not appear in Windows Explorer.

This behavior can occur if you map a network drive to the next available drive letter after the local volumes and CD-ROM drives have been assigned drive letters. Do the following if you

experience this problem:

1.Assign the network drive to any other drive letters.

2.Restart your computer.

10

Troubleshooting

Chapter 10

Troubleshooting

10-9