[Button assignment] tab

Configure the settings for assigning the job to a job button on the scanner. If the [Assign scanner Start button to Scan First] check box is selected in the main screen, you cannot assign the job to the Start button.

4 Click the [OK] button.

The job is registered according to the configured settings and appears in the job list. To confirm or modify the settings of a registered job, click the [Job list/edit] button.

Selecting a Job and Scanning

1 Load the document into the scanner. (See p. 28.)

2 Click the [Select Scan Job] tab.

The main screen of [Select Scan Job] appears.

3 Select a job in [Job list].

75