Troubleshooting
Common Problems and Solutions
This section provides recommended solutions to common problems. If you have a problem that is not solved by the following, contact your local authorized Canon dealer.
Problem 1 The scanner does not turn ON.
Solutions | (1) | The scanner remains OFF while the feed tray is |
|
| closed. When you open the feed tray, the scanner |
|
| turns ON automatically. |
| (2) | If the scanner is connected to the computer via a |
|
| USB hub, try removing the hub and connecting |
|
| directly to the computer. |
Problem 2 The scanner is not recognized. | ||
Solutions | (1) | Confirm that the scanner is properly connected to |
|
| the computer with a USB cable. |
| (2) | Confirm that the scanner is turned ON. See the |
|
| previous problem (1) if the scanner does not turn |
|
| ON. |
| (3) | The computer’s USB interface may not support the |
|
| scanner. The scanner cannot be guaranteed to |
|
| work with all USB interfaces. |
| (4) | Confirm that the supplied USB cable is used to |
|
| connect the scanner to the computer. The scanner |
|
| cannot be guaranteed to work with all available USB |
|
| cables. |
| (5) | When the Auto Start switch on the scanner is set to |
|
| ON, you can only scan with the |
|
| CaptureOnTouch Lite. In this case, scanning from |
|
| applications on the computer is disabled. |
| (6) | If “?”, “!”, or “x” icons appear for the scanner in |
|
| Windows Device Manager, delete the scanner in |
|
| Device Manager and reinstall the scanner driver. |
Problem 3 CaptureOnTouch Lite does not start.
Solutions | (1) | If the Auto Start switch on the scanner is set to OFF, | |
|
| the | |
|
| not start. Close the feed tray to turn OFF the | |
|
| scanner, and set the Auto Start switch to ON. | |
| (2) CaptureOnTouch Lite does not start automatically in | ||
|
| Windows 2000. Open the [ONTOUCHLITE] drive | |
|
| under [My Computer] in Windows Explorer, and | |
|
| ||
|
| settings for your operating system, | |
|
| CaptureOnTouch Lite may not start automatically in | |
|
| Windows Vista and Windows XP. Perform the same | |
|
| procedure as above to start CaptureOnTouch Lite in | |
|
| this case. |
|
|
| CaptureOnTouch Lite does not start automatically in | |
|
| Mac OS X. | icon on the desktop |
|
| to open the [ONTOUCHLITE] folder. And double- | |
|
| click the CaptureOnTouch Lite icon. | |
| (3) | If access to USB devices is blocked by security | |
|
| software, you may not be able to use | |
|
| CaptureOnTouch Lite. |
|
| (4) | If you purchased the | |
|
| CaptureOnTouch Lite will not run on a Windows | |
|
| computer. If you purchased the | |
|
| CaptureOnTouch Lite will not run on a Macintosh | |
|
| computer. |
|
Problem 4 The auto play screen appears when the scanner is
| connected, but you cannot scan with |
| CaptureOnTouch. |
Solutions | When the Auto Start switch on the scanner is set to ON, |
| you can only scan with the |
| CaptureOnTouch Lite. Close the feed tray to turn OFF |
| the scanner, and set the Auto Start switch to OFF. |
92