Scanning with CaptureOnTouch Lite
CaptureOnTouch Lite is a scanning application that comes pre installed in the scanner. It can be used on a computer that does not have the scanner driver installed.
You can follow the instructions on the screen to scan a document and save the scanned images in any file format.
Scanning Procedure
1 Set the Auto Start switch at the rear panel of the scanner to ON and then connect the scanner to the computer.
Auto Start
OFF
ON
USB cable
If necessary, connect the power supply USB cable.
2 Open the feed tray and the scanner is turned ON automatically.
The computer recognizes the scanner as a storage device, and the [ONTOUCHLITE] icon appears on the desktop.
IMPORTANT
When scanning with CaptureOnTouch Lite, do not close the feed tray until you have finished saving image files.
3 Subsequently, the following window opens automatically.
CaptureOnTouch Lite starts and the main screen appears.
60