CaptureOnTouch Lite is a scanning application that comes pre- installed in the scanner. It can be used on a computer that does not have the scanner driver installed.
You can follow the instructions on the screen to scan a document and save the scanned images in any file format.
Scanning Procedure
1 Set the Auto Start switch at the rear panel of the scanner to ON and then connect the scanner to the computer.
Auto Start
OFF
ON
USB cable
If necessary, connect the power supply USB cable.
2 Open the feed tray, turn ON the scanner, and then load the document.
For details, see “Loading a Document” on p. 28.
When you open the feed tray, the power indicator on the scanner lights and the auto play screen appears.
IMPORTANT
•When scanning with CaptureOnTouch Lite, do not close the feed tray until you have finished saving image files.
•If you are using Windows XP or Windows 2000 and you set the Auto Start switch to ON before connecting the scanner to the computer, a message requesting that you restart your computer may appear when you turn ON the scanner. You can continue normal use even if you click [No] and do not restart the computer.
3 Click [CaptureOnTouch Lite].
CaptureOnTouch Lite starts, and the main screen appears.
Hint
•The auto play screen may not appear in some operating environments. In such cases, open the [ONTOUCHLITE] drive in Windows Explorer, for example, and start the application directly by 
(ONTOUCH.exe).
Depending on your operating system, the drive name may not be [ONTOUCHLITE]. Open the drive on which 
(ONTOUCH.exe) is located, and start the application directly.
31