4Choose [WPS Connection]. zzPress the <o><p> buttons or turn the
<5> dial to choose [WPS Connection], and then press the <m> button.
5Choose [PBC Method].
zzPress the <o><p> buttons or turn the <5> dial to choose [PBC Method], and then press the <m> button.
6Establish the connection.
zzOn the access point, hold down the WPS connection button for a few seconds.
zzOn the camera, press the <m> button.
XXThe camera will connect to the access point.
XXA list of computers connected to the access point will appear in the [Select a Device] screen.
7Choose a computer to connect to. zzPress the <o><p> buttons or turn the
<5> dial to choose the computer name, and then press the <m> button.
zzWhen using a Macintosh computer, see “Using CameraWindow to Transfer Images to a Computer” (=138).
8Install a driver (first Windows connection only).
zzWhen the screen at left is displayed, click the Start menu on the computer, click [Control Panel], and then click [Add a device].
zzDouble click the connected camera icon. XXDriver installation will begin.
XXAfter driver installation is complete, and the camera and computer connection is enabled, the AutoPlay screen will be displayed. Nothing will be displayed on the camera screen.
zzProceed to “Using CameraWindow to Transfer Images to a Computer” (=138).
•When you are in the vicinity of an access point that you have previously connected to, the camera will automatically connect to it in step 3. To change access points, select [Switch Network] from the screen that will be displayed when the connection is being established, and follow steps 4 – 5 in “Adding a Computer” (=136).
Cover
Preliminary Notes
and Legal Information
Contents: Basic
Operations
Basic Guide
Advanced Guide
1 | Camera Basics |
2 | Using GPS |
Function | |
3 | Auto Mode/ |
Hybrid Auto Mode | |
4 | Other Shooting |
Modes | |
5 P Mode | |
6 | ModeTv, Av, and M |
7 | Playback Mode |
8 | |
9 | Setting Menu |
10 | Accessories |
11 | Appendix |
Index
136