Still Images

•A flashing [] icon warns that images are more likely to be blurred

by camera shake. In this case, mount the camera on a tripod or take other measures to keep it still.

•If your shots are dark despite the flash firing, move closer to the subject. For details on the flash range, see “Flash Range” (=191).

•The subject may be too close if the camera only beeps once when you press the shutter button halfway. For details on the focusing range (shooting range), see “Shooting Range” (=192).

•To reduce red-eye and to assist in focusing, the lamp may be activated when shooting in low-light conditions.

•A blinking [h] icon displayed when you attempt to shoot indicates that shooting is not possible until the flash has finished recharging. Shooting can resume as soon as the flash is ready, so either press the shutter button all the way down and wait, or release it and press it again.

•The shutter sound will not be played when the Sleeping and Babies (Sleeping) icons (=51) are displayed.

•Restart the camera if the message [Wrong flash position. Restart the camera] displayed, which indicates that your finger or some other object is obstructing the movement of the flash.

• You can change how long images are displayed after shots (=67).

Movies

Microphone

• Keep your fingers away from the

 

microphone while shooting movies.

 

Blocking the microphone may prevent

 

audio from being recorded or may cause

 

the recording to sound muffled.

•Avoid touching camera controls other than the movie button when shooting movies, because sounds made by the camera will be recorded.

•Once movie recording begins, a smaller image display area is shown, with the subject enlarged, as a measure when correcting distortion such as rotational camera shake. To shoot subjects at the same size shown before shooting, adjust the image stabilization setting (=95).

• Audio is recorded in stereo.

• Distorted audio caused by recording when the wind is strong can be reduced. However, the recording may sound unnatural when this option is used when there is no wind. When the wind is not strong, press the <n> button, choose [Wind Filter] on the [4] tab, and then choose [Off] (=35).

Cover

Preliminary Notes

and Legal Information

Contents: Basic

Operations

Basic Guide

Advanced Guide

1

Camera Basics

2

Using GPS

Function

3

Auto Mode/

Hybrid Auto Mode

4

Other Shooting

Modes

5 P Mode

6

ModeTv, Av, and M

7

Playback Mode

8

Wi-Fi Functions

9

Setting Menu

10

Accessories

11

Appendix

Index

50