Connection status of Eye-Fi cards in the camera can be checked on the shooting screen (in regular information display mode) or playback screen (in simple information display mode).

Disabling Eye-Fi Transfer

Configure the setting as follows to disable Eye-Fi transfer by the card, if necessary.

Cover

Preliminary Notes

and Legal Information

Contents: Basic

Operations

(Gray)

Not connected

(Blinking white)

Connecting

(White)

Connected

 

 

(Animated)

Transfer in progress*1

Interrupted

Not communicating

Error acquiring Eye-Fi card information*2

Choose [Disable] in [Eye-Fi trans.].

zzPress the <n> button, choose [Eye-Fi Settings] on the [3] tab, and then press the <m> button.

Basic Guide

Advanced Guide

1 Camera Basics

*1 Power saving (=32) on the camera is temporarily disabled during image transfer.

*2 Restart the camera. Repeated display of this icon may indicate a problem with the card.

Images labeled with a [] icon have been transferred.

Choosing [] mode will interrupt the Eye-Fi connection. Although the Eye-Fi connection will be restored after you choose another shooting mode or enter Playback mode, the camera may transfer any movies made in [] mode again.

Checking Connection Information

Check the access point SSID used by the Eye-Fi card or the connection status, as needed.

zzPress the <n> button, choose [Eye-Fi Settings] on the [3] tab, and then press the <m> button.

zzChoose [Connection info], and then press the <m> button.

XXThe connection information screen is displayed.

zzChoose [Eye-Fi trans.], and then choose [Disable].

[Eye-Fi Settings] is not shown unless an Eye-Fi card is in the

camera with its write-protect tab in the unlocked position. For this reason, you cannot change settings for an inserted Eye-Fi card if the write-protect tab is in the locked position.

2

Using GPS

Function

3

Auto Mode/

Hybrid Auto Mode

4

Other Shooting

Modes

5 P Mode

6

ModeTv, Av, and M

7

Playback Mode

8

Wi-Fi Functions

9

Setting Menu

10

Accessories

11

Appendix

Index

171