Sound and Volume Controls
E n g l i s h
Sound Control
IMPORTANT!
For proper surround sound, make sure the speakers and subwoofer are connected (see page 10).
Selecting surround sound
●Press SURROUND (SURR.) to select :
➜The availability of the various surround sound modes depends on the number of speakers used and the sound available on the disc.
➜The centre and surround speakers operate only when the DVD home cinema system is set to
➜The available output modes for Multi- channel include: Dolby Digital, DTS (Digital Theatre Systems) Surround and Dolby Pro Logic.
➜Stereo broadcasts or recordings will produce some surround channel effects when played in a surround mode. However, mono (single channel sound) sources will not produce any sound from the surround speakers.
Note:
–You are not able to select the surround sound mode if the system menu/menu bar is turned on.
Adjusting Bass/Treble level
The BASS (low tone) and TREBLE (high tone) features enable you to define the sound- processor settings.
1Press BASS or TREBLE.
➜ The level indicator appears.
2Within five seconds, use the VOLUME control to adjust the Bass or Treble level
➜ If the volume control is not used within five seconds, it will resume its normal volume control function.
Selecting digital sound effects
Select a preset digital sound effects that matches your disc’s content or that optimises the sound of the musical style you are playing.
●Press SOUND on the remote.
When playing movie discs, you can select : CONCERT, DRAMA,ACTION or
When playing music discs or while in TUNER or AUX/DI mode, you can select : ROCK, DIGITAL, CLASSIC or JAZZ.
Note:
– For flat sound output,select CONCERT or
CLASSIC.
Turning on/off clear voice effect
You can enhance the centre and surround sound outputs by activating the clear voice sound feature if you have selected Multi- channel as the surround mode.
●Press VOICE on the remote to select “CLEAR VOICE ON”.
➜ To turn off the setting, press VOICE again to select “CLEAR VOICE OFF”.
Changing subwoofer volume level
●Press SUB +/- on the remote to adjust subwoofer volume level
Volume control
●Adjust VOLUME control (or press
VOL +/- on the remote) to increase or decrease the volume level.
➜ "VOL MIN" is the minimum volume level and “VOL MAX” is the maximum volume level.
To listen through the headphones
●Connect the headphones plug to the n socket at the front of the DVD system.
➜ The speakers will be muted.
To turn off the volume temporarily
●Press MUTE on the remote.
➜Playback will continue without sound and "MUTE" appears.
➜To restore the volume, press MUTE again or increase the volume level.
44
