Philips MX5800SA/21 manual Changing tuning grid not available, Selecting a preset radio station

Tuner Operations

1Press TUNER on the remote (or adjust SOURCE control on front panel) to select “FM TUNER” or “MW TUNER”.

2Press 1 2 or use the numeric keypad (0-9)to select a preset number to begin.

●If you use S / T on the front panel for preset tuning, make sure the system is in preset tuning mode. If not, press TUNING. ➜ "PRESET MODE" appears.

3Press and hold PROGRAM (or PROG on the front panel) until "AUTO PROGRAM" appears.

➜If a radio station is stored in one of the presets, the same radio station will not store under another preset number.

➜If no preset number is selected, automatic preset will begin from preset (1) and all your former presets will be overridden.

Manual presetting

You can choose to store only your favourite radio stations.

1In tuner mode, press PROGRAM (or PROG on the front panel).

2Press 1 2 or use the numeric keypad (0-9)to select a preset number.

3Press S / T on the remote to select a radio station.

4Press PROGRAM again to store.

Changing tuning grid (not available

for all versions)

In North and South America, the frequency step between adjacent channels in the MW band is 10 kHz (9 kHz in some areas). The preset frequency step in the factory is 9 kHz.

IMPORTANT!

Changing the tuning grid will erase all previously stored preset radio stations.

OPEN•CLOSE

DISC 1 DISC 2 DISC 3 DISC 4 DISC 5

DISC 1

DISC 2

DISC 3

DISC 4

DISC 5

5 DISC CHANGER

STANDBY- ON iR SENSOR

1Disconnect the system from the AC power supply (pull out the AC power cord).

2While holding down STANDBY ON and OPEN•CLOSE 0 DISC5 on the main unit, reconnect the system to the AC power supply.

➜The display will show "GRID 9" or "GRID 10".

Notes:

–GRID 9 and GRID 10 indicate that the tuning grid is in step of 9 kHz and 10 kHz respectively.

–The FM tuning grid also will be changed from 50 kHz to 100 kHz or vice versa.

E n g l i s h

Selecting a preset radio station

●Press 1 2 or use the numeric keypad (0-9)to select a preset number.

➜ The preset number, radio frequency, and waveband will appear.

Deleting a preset radio station

●Press and hold Ç until “PRESET DELETED” appears.

➜The current preset radio station will be deleted and the next available preset radio station will take its place.

➜All other preset radio stations with higher numbers will decrease by one.

41