Step 3: Setting the TV
IMPORTANT!
Make sure you have completed all the necessary connections. (See pages 12~13 “Connecting TV”).
1Adjust SOURCE control until “DISC X” appears on the display panel (or press DISC/MEDIA on the remote).
2Turn on the TV and set to the correct
➜Usually this channel is between the lowest and highest channels and may be called FRONT,A/V IN, or VIDEO. See your TV manual for more details.
➜Or, you may go to channel 1 on your TV, then press the Channel down button repeatedly until you see the Video In channel.
➜Or, the TV remote control may have a button or switch that chooses different video modes.
➜Or, set the TV to channel 3 or 4 if you are using an RF modulator.
Changing the NTSC/PAL setting via the remote control
DISC/
TV/AV MEDIA TUNER AUX/DI
1, 2
1 2 3
4 5 6
1Press DISC/MEDIA on the remote to enter disc mode.
➜Make sure no MP3 disc is in disc tray 1.
➜Wait until the system finishes reading the
discs before proceeding to next step.
If playback begins, press Ç to stop playback.
2Press and hold DISC/MEDIA on the remote until “PAL” or “NTSC” appears on the display panel.
➜ To change the setting, repeat step 2.
Getting Started
Selecting the colour system that corresponds to your TV
This DVD system is compatible with both NTSC and PAL. In order for a DVD to play on this DVD system, the colour system of the DVD, the TV and the DVD system should match.
|
|
| SYSTEM MENU | DISC MENU |
|
| 1 |
|
|
| 2 , | 3 | SEATING | ZOOM |
|
| 4 | PREV | NEXT |
➠ |
|
| OK | |
|
| STOP | PLAY/PAUSE | |
1en | 1en | 1 | st |
|
TV Shape |
|
|
|
|
Black Level shift |
|
|
|
|
Video shift |
|
|
|
|
Color settings |
|
|
|
|
Personal color |
| Pal |
|
|
Digital Crystal Clear |
|
| ||
NTSC |
|
| ||
|
|
|
| |
TV System |
| Auto |
|
|
1In disc mode, stop playback and press
SYSTEM MENU.
2Use the joystick (1 2 3 4) on the remote to navigate in the menu.
3 Select | icon and press 4. |
Move to 
and press 2.
Move to ‘TV System’ and press 2.
Auto – Select this if the connected TV is compatible with both NTSC and PAL (multi- system). The output format will be in accordance with the video signal of the disc.
NTSC – Select this if the connected TV is NTSC system. It will change the video signal of a PAL disc (VCD only) and output to NTSC format. Set the ‘Black level shift’ to ‘On’ in order to improve the colour contrast and picture when you play an
PAL – Select this if the connected TV is PAL system. It will change the video signal of an NTSC disc and output to PAL format.
4 Select an item and press OK.
To remove the menu
Press SYSTEM MENU.
E n g l i s h
19
