Philips MX5800SA/21 Setting the analogue output, DVD Menu Options, E n g l i s h, Analog output

DVD Menu Options

E n g l i s h

Setting the analogue output

Set Analogue Output to match your DVD home cinema system’s playback capability. This function can also be accessed via the SURR. button on the remote control (or SURROUND on the front panel).

Follow the steps of “Using the Setup Menu” and select :

> Analog output

1en	1en	1	st
Digital output
Analog output		Stereo
Night mode		3D sound
Karaoke vocal		Multi-channel
Speaker layout
Speakers
PCM output

Stereo

Select this to change channel output to stereo which delivers sound from only the two front speakers and subwoofer.

3D Sound

Select this to change channel output to 3D sound which delivers surround sound from only the two front speakers and subwoofer.

Multi-channel

Select this to enable Multi-channel output.

Night mode – turning on/off

Follow the steps of “Using the Setup Menu” and select :

> Night mode

1en	1en	1	st
Digital output
Analog output
Night mode
		On
Karaoke vocal		Off
Speaker layout
Speakers
PCM output

Off

Select this when you want to enjoy the surround sound with its full dynamic range.

On

Select this to level out the volume. High volume outputs will be softened and low volume outputs are brought upward to an audible level. This feature is only available for movies with Dolby Digital mode.

34