Philips MX5800SA/21 Connecting TV, Using Composite Video jack CVBS, Connections, E n g l i s h

E n g l i s h

Connections

Step 6: Connecting TV

						COMPONENT
						VIDEO IN
					S-VIDEO
					IN		Pr/Cr
					AUDIO
					OUT
							Pb/Cb
					VIDEO IN
							Y
L	WOOFER-		MW
R	SUB			FM ANTENNA		1
C			AUDIO		VIDEO
	DIGITAL	AUX	TV	LINE	OUT
SL					CVBS
	OUT	IN	IN	OUT
SR		L				Pb
		R					P-SCAN
						Y	ON	OFF
	DIGITAL				S-VIDEO
	IN

23

IMPORTANT!

–You only need to make one video connection from the following options, depending on the capabilities of your TV system.

–Connect the DVD system directly to the TV.

COMPONENT

VIDEO IN

S-VIDEO

IN

AUDIO Pr/Cr

OUT

Pb/Cb

VIDEO IN

Y

L	WOOFER-		MW			1
R	SUB			FM ANTENNA
C			AUDIO		VIDEO
	DIGITAL	AUX	TV	LINE	OUT
SL					Pr
	OUT	IN	IN	OUT	CVBS
SR		L			Pb
		R				P-SCAN
					Y	ON	OFF
	DIGITAL				S-VIDEO
	IN
			2				3

IMPORTANT!

–Component Video connection provides higher picture quality. This option must be available on your TV.

–The progressive scan video quality is only possible through Component Video (Pr Pb Y) output.

Using Composite Video jack (CVBS)

1Use the composite video cable (yellow) to connect the DVD system’s CVBS jack to the video input jack (or labelled as A/V In, Video In, Composite or Baseband) on the TV.

2To hear the TV channels through this DVD system, use the audio cables (white/red) to connect TV IN (L/R) jacks to the corresponding AUDIO OUT jacks on the TV.

3 Set the P-SCANswitch to ‘OFF.’

Using Component Video jacks (Pr Pb Y)

1Use the component video cables (red/blue/ green) to connect the DVD system’s Pr PbY jacks to the corresponding Component video input jacks (or labelled as Pr/Cr Pb/Cb Y or YUV) on the TV.

2To hear the TV channels through this DVD system, use the audio cables (white/ red) to connect TV IN (L/R) jacks to the corresponding AUDIO OUT jacks on the TV.

3If you are using a Progressive Scan TV (TV must indicate Progressive Scan or ProScan capability,) set the P-SCANswitch to ‘ON.’ Otherwise, set it to ‘OFF.’

12