Attaching to the Camera 
1
2
Loosen the locking ring.
Turn the locking ring as shown by the arrow to loosen it.
Attach it to the camera.
Slip the Speedlite’s mounting foot all the way into the hot shoe.
3 Tighten.
Turn the locking ring as shown by the arrow. The locking pin will protrude from the mounting foot to further secure the attachment.
To detach the Speedlite, loosen the locking ring until the locking pin disengages. Then slip the Speedlite out of the hot shoe.
Before attaching or detaching the Speedlite, be sure to turn off the Speedlite.
Wireless Selector Settings
The wireless selector is for switching between normal flash shooting and wireless flash shooting.
For normal flash shooting, be sure to set the wireless selector to <L>.
9