qManual Flash

You can set the flash output from 1/64 power to 1/1 full power in full- stop increments.

Use a hand-held flash meter to determine the required flash output to obtain a correct flash exposure. Be sure to first set the camera’s shooting mode to <W> or <q>.

1Press the <D> button so that <q> is displayed.

2 Set the flash output. Press the <8> button.

XThe flash output display will blink.

Press the <9> button to set the flash output, then press the <8> button.

ress the shutter button halfway to see the effective flash range displayed.

19