7FE Lock
FE (flash exposure) lock enables you to lock the correct flash exposure for any part of the picture.
With <a> displayed on the LCD panel, you press the camera’s <7> button. If the camera does not have the <7> button, press the <P> button.
1Focus the subject.
2 Press the <7> button. (3)
Aim the viewfinder center over the subject and press the <7> button.
X A preflash will be fired to obtain a flash exposure reading for the subject.
X“FEL” will be displyed on the LCD panel for 0.5 sec.
Each time you press the <7> button, a preflash will be fired and a new flash exposure reading will be locked.
If the subject is too far away and underexposure will result, the <Q> icon will blink in the viewfinder. Move closer to the subject and try the FE lock again.
If <a> is not displayed on the LCD panel, FE lock will not be possible.
If the subject is too small, FE lock might not be very effective.
15