Wireless Flash

With multiple Canon Speedlites having the wireless flash feature, you can create various lighting effects with the same ease as using normal E-TTL II autoflash.

The settings you input with the master unit attached to the camera are also transmitted to the slave unit(s) controlled by wireless. Therefore, you need not operate the slave unit(s) at all during the shoot.

For details on wireless flash photography and operating the master unit, see the master unit’s instruction manual. The procedure below applies to a master unit attached to the camera and slave unit(s) controlled by wireless.

1 Set the master unit.

Attach Speedlite 580EX, 550EX, ST- E2, MR-14EX or MT-24EX to the camera and set it as necessary.

2 Set the 430EX as the slave unit.

Set the wireless selector to <N>.

3

heck the communication

 

channel.

If the master unit and slave unit(s) are set to a different channel, set them all to the same channel (p.27).

4 Set the slave ID.

Set the slave ID when using two (A and B) or three (A, B, and C) slave groups (p.28).

5Position the camera and Speedlites as desired.

Position the slave unit(s) within the master unit's wireless transmission range.

24