Setting the Slave ID

Set the slave ID if you use two (A and B) or three (A, B, and C) slave groups.

1 Press the <G> button so that <x> blinks.

2Press the <9> button to select the slave ID (A, B, or C).

3Press the <8> button to set the slave ID.

Modeling Flash

If the camera has a depth-of-field preview button, press it to fire a 1-sec. burst of flashes. This is the modeling flash.

You can check the lighting and shadow effects. You can fire the modeling flash for both wireless and normal flash shooting.

Do not fire the modeling flash more than 10 consecutive times. If you fire the modeling flash 10 consecutive times, allow the Speedlite to rest for at least 10 min. to avoid overheating and deteriorating the flash head.

The modeling flash cannot be fired with the EOS 300/REBEL 2000 and Type-B cameras (p.2).

About Slave Group Control

Slave group A

ID = A ID = A ID = A

For example, if you have the slave ID set to <1> for three Speedlites, all three Speedlites will be controlled as if they were one Speedlite in slave group A.

28