Changing Shooting Function Settings

•If camera shake is too strong, attach the camera to a tripod. You should

also set the IS Mode to [Off] when the camera is attached to a tripod.

•When using [Panning], hold the camera horizontally to shoot. Image stabilization does not work when the camera is held vertically.

When shooting movies, if you press the zoom lever toward j and zoom out, the effect increases.

Registering Functions to the Button

●Choose [Set Shortcut button], then press the mbutton.

●Press the opqrbuttons or turn the  dial to choose the functions to register, then press the mbutton.

●ressing the button will call up the registered function.

•

Choose

if you want to return the button to default settings.

•

When this

symbol is shown on the bottom right of an icon, the

function cannot be used in the current Shooting mode or function setting.

•In , each press of the button records white balance data (p. 77), and the white balance settings change to .

•In %, each press of the button will adjust and lock the focus, and %will appear on the screen.

•If you press the button in , both the screen and viewfinder displays will turn off. Try one of the following to restore the displays:

•Press any button other than the power button

•Change the camera’s vertical or horizontal orientation

•Open and close the screen

•Raise and lower the flash

162