Canon SX30 IS, SX30IS Make the setting, Attaching the Hot Shoe Cap, Display the flash settings screen, Turn the flash on, then turn the camera on

Using an Externally Mounted Flash (Sold Separately)

Turn the flash on, then turn the camera on.

XA red happears on the screen (or the viewfinder).

XWhen the flash is charged, its pilot lamp will light.

Display the flash settings screen.

●Press the nbutton to choose [Flash Control] from the 4tab, then press the mbutton.

XThe options set on the flash will appear.

Make the setting.

●ress the opbuttons or turn the Âdial to choose an item, then press the qr buttons to adjust the setting.

●The available settings differ depending on the flash (p. 170).

●In modes other than G, M, B, and D, flash settings cannot be changed since the flash adjusts and fires automatically.

If you hold down the h button for more than one second, you can also display the settings screen.

Attaching the Hot Shoe Cap

●Attach the hot shoe cap when you are not using an externally mounted flash.

169