Using an Externally Mounted Flash (Sold Separately)

You can make your flash photography even better with the use of a Speedlite EX series flash (sold separately).

•You should set the white balance to h.

•Please also read the Speedlite series manual included with the flash.

•When a Speedlite EX series flash is mounted, you cannot set the built-in

flash.

•Some functions on Speedlite 270EX, 430EX II, and 580EX II cannot be used with this camera.

•When using Canon brand flashes other than Speedlite EX series models, the flash may not fire correctly, or may not fire at all. Flashes with a manual firing function can be used in manual mode, however red- eye correction is not available.

•Using a non-Canon brand flash (particularly a high-voltage flash) or flash accessories may inhibit normal operation or damage the camera.

Attach the case for the hot shoe cap to the strap.

● Remove the strap from the camera.

● Pass the strap through the back of the case.

●Attach the strap to the camera (p. 13).

Remove the hot shoe cap.

● Push ( ) and lift ( ) the cap to remove it. ● To avoid losing the cap when you remove it, place it in the case you attached to the

strap.

Attach the flash to the hot shoe.

168