128

Uploading Recordings Using an iOS Device

Uploading Recordings Using an iOS Device

Using the Movie Uploader app* for iOS devices, you can wirelessly connect the camcorder to the device to upload your movies to YouTube and your movies and photos to Facebook even when you are away from your home network. You can even save** and play back MP4 movies and photos on the iOS device.

* The Movie Uploader app, provided by PIXELA, is available for free from the App Store. ** Not available for MP4 movies recorded at 35 Mbps.

iOS device

Operating modes:

POINTS TO CHECK

Before you perform this procedure for the first time, install the Movie Uploader app on your iOS device. The app can be downloaded for free from the following site. http://appstore.com/movieuploader

1Camcorder: Open the desired movie index screen (A95).

2 Camcorder: Open the [Movie Uploader] screen. [MENU] >s>[Wi-Fi] >[Movie Uploader]

The camcorder’s SSID (network name) will appear.

The camcorder will be ready to connect with the iOS device.

To set or change the camcorder's password, perform the procedure in Setting the Camcorder's Password (A120) starting from step 2.

3iOS device: Activate Wi-Fi in the settings screen.

• The network names of detected access points will appear.

4iOS device: Touch the access point with the same SSID displayed in step 2.

If you have performed this procedure before and you have not changed the camcorder's password, the connection will be established automatically.

5iOS device: Enter the camcorder's password set previously.

• [Connected] will appear on the camcorder’s screen and the connection will be established.

6iOS device: Use the Movie Uploader app to upload the camcorder’s movies (and photos, if applicable).

• You can also play back or save MP4 movies.7Camcorder: Touch [End] >[OK] when finished.• After the connection has ended, the index screen will appear.