Canon DIE-0436-000, VIXIA HF630 Switching the Input (MIC Terminal), Low Cut Filter (MIC Terminal), Audio Mix, Recording Audio, Operating modes:, Operating modes:, Operating modes:

Recording Audio

Switching the Input (MIC Terminal)

You can switch the input of the MIC terminal depending on whether you are using an external microphone or an external audio source, such as a digital audio player.

Operating modes:

1 Open the [MIC Terminal Input] screen.

84[FUNC.] >[MENU] >p>[MIC Terminal Input]

2Touch [ÞExternal Audio] or [ßMicrophone] and then touch [X].

• If necessary, activate and adjust the audio mix balance (A84).

Low Cut Filter (MIC Terminal)

When you are recording using a microphone connected to the MIC terminal, you can activate the low cut filter to reduce the sound of blowing wind, a car’s engine and similar ambient sounds.

Operating modes:

1Open the [MIC Low Cut] screen.

[FUNC.] >[MENU] >p>[MIC Low Cut]

2 Touch [iOn] and then touch [X].

Audio Mix

When recording, you can mix audio from the built-in microphone with external audio from the MIC terminal and adjust the mix balance for original sound effects. The external audio input can be from the optional WM-V1 Wireless Microphone, a commercially available external microphone or from an external audio player (analog Line In).

Operating modes:

1Connect the external source to the MIC terminal.

2 Open the [MIC Terminal Input] screen.

[FUNC.] >[MENU] >p>[MIC Terminal Input]

3Touch [ÞExternal Audio] or [ßMicrophone] and then touch [K].

• This step is not necessary after connecting the optional WM-V1 Wireless Microphone.

4Activate the audio mix. [Audio Mix] >[iOn]

5Adjust the audio mix balance as necessary.

•Touch [INT] (more of the sound from the built-in microphone) or [EXT] (more of the sound from the external audio) or drag your finger along the audio mix bar to adjust the mix balance as desired.

6 Touch [X] to set the audio mix and close the menu.