Appendix: Menu Options Lists

[OLED Mirror Image]: When set to [iOn], this function reverses the image on the screen horizontally when you rotate the OLED panel 180 degrees toward the subject. In other words, the screen will show a mirror image of the subject.

[OLED Color Balance]: Allows you to adjust the color balance of the OLED screen. Adjust the [B] (blue) and [R] (red) bars by touching [+] and [-]. You can check the results on the screen.

[VF Brightness]: Sets the viewfinder screen to one of two brightness levels. You can use this to make

151

the screen brighter if it is difficult to see.

 

 

 

 

 

[Notification Sounds]: A beep will accompany some of the camcorder's operations.

 

• While pre-recording (A88) is activated, the camcorder will not emit any notification sounds.

 

[Wireless Remote Control]: Allows the camcorder to be operated with the wireless controller.

 

[Powered IS Button]: Determines the operation mode of the assignable button set to [ÈPowered IS]

 

(A61).

 

 

 

 

[ÎPress and Hold]: Powered IS will be activated while you hold the button pressed down.

 

[ÏToggle On/Off]: Each press of the button will turn the Powered IS function on and off.

 

[Set WB Priority]: You can press an assignable button set to [ÄWB Priority] to switch between the

 

current white balance and the white balance setting selected for [Set WB Priority].

 

[Focus/Zoom Ring Direction]: Changes the direction the focus/zoom ring needs to be turned.

 

[Focus/Zoom Ring Response]: Selects the sensitivity of the response when operating the focus/zoom

 

ring.

 

 

 

 

[Focus Preset Speed]: Determines the speed at which the focus changes to the preset position.

 

[Auto Power Off]: In order to save power when the camcorder is powered by a battery pack, it will

 

automatically shut off if left without any operation for 5 minutes.

 

• Approximately 30 seconds before the camcorder shuts off, [Auto Power Off] will appear.

 

[Battery Info]: When you are using a battery pack that is compatible with Intelligent System, this option

 

displays a screen where you can verify the battery charge (as a percentage) and the remaining

 

recording time (mode) or playback time (

 

mode).

 

 

 

 

 

• If the battery pack is exhausted, the battery information may not be displayed.

[HDMI Time Code]: When set to [iOn], the HDMI signal output from the camcorder includes the camcorder's time code.

[HDMI Status]: Displays a screen where you can verify the standard of the output signal from the HDMI OUT terminal.

[Output Onscreen Displays]: When set to [iOn], the camcorder’s onscreen displays will appear also on the screen of a TV or monitor connected to the camcorder.

[Distance Units]: Selects the units to use for the focusing distance display while focusing manually. This setting also affects units for GPS information when using the optional GP-E2 GPS Receiver.

[GPS Auto Time Setting]: When the optional GP-E2 GPS Receiver is attached to the camcorder, you can have the camcorder automatically set the time based on the information acquired from GPS. For more details, refer to Setting Time from GPS on the Camera in the receiver's instruction manual.