Transferring Files to a Computer or FTP Server

Transferring Files to a Computer or FTP Server

You can wirelessly transfer files (recordings) directly to a computer or an FTP server. You will need a correctly configured FTP server. During the manual setup procedure, you will need to enter the FTP server's IP address, port, user name, password and file transfer destination (where the files will be transferred to).

To enter text for the various settings, use the virtual keyboard (A132).

Access point

Operating modes:

1Camcorder: Open the desired movie index screen (A95).

2 Open the [FTP Transfer] screen.

[MENU] >s>[Wi-Fi] >[FTP Transfer]

131

Computer

3Enter the FTP server's IP address for [FTP Server] and the port number for [Port].

4 Touch [Next].

5 Enter the user name and password and then touch [Next].

6 Enter [/] for [Destination Folder] and then touch [OK].

•Depending on the FTP server's settings, the required text for the port number and destination folder may differ. Check the settings on your FTP server.

•The camcorder will connect to the access point selected in Wi-Fi Connection Using an Access Point (A138).

7When [Save the access point] appears on the screen, touch [OK] and then perform the procedure in Wi-Fi Connection Using an Access Point (A138).

8Touch the desired memory card and then touch [OK].

•You can select both memory cards.

•Touch [All files] to transfer all the recordings or [New files] to transfer only those recordings that have not been previously transferred.

•Once connected, the wireless transfer will begin.

•You can touch [Stop] and then [X] to stop the wireless transfer while it is in progress. However, depending on when you stop the operation, some files will be transferred.

9Touch [OK].

• The wireless transfer will end.