Changing the Lithium Battery
This adapter is operated by a lithium battery (2CR5 type). When the lithium battery is nearly exhausted, the lithium battery caution indicator begins to flash. When this occurs, install a new lithium battery by following the instructions. The lithium battery caution indicator will only operate when the lens and adapter are attached to the camcorder and the camcorder is turned on.
1.Turn off the camcorder and remove the adapter ( K ).
2.Remove the lithium battery compartment cover by sliding the cover upwards, then replace the lithium battery ( L ) .
●Make sure that the (+) and
3.Replace the lithium battery compartment cover ( M ).
WARNING
The battery used in this device may present a fire or chemical burn hazard if mistreated. Do not recharge, disassemble, heat above 212°F (100°C) or incinerate.
NOTES
●Be sure to keep the electronic contacts clean, to ensure proper connection. When not using the adapter, be sure to attach the mount caps to the mount sections in order to protect them from damage.
●Do not try to disassemble or modify this adapter.
●Protect the adapter from strong vibrations or shocks.
●Do not store the adapter in hot places such as in direct sunlight, near a heater or radiator, in a hot car, etc. This may cause the adapter to become deformed or discolored.
12