?There’s no sound coming from the speaker during playback.
Memory card operations
Problem
?The memory card will not insert.
?The 
mark flashes red in the display even though a memory card has been inserted.
?Nothing happens when I press the buttons.
?The PHOTO button doesn’t work.
•The speaker has been turned off with the selector dial ( 
30).
•Headphones are being used.
Cause and/or what to do about it
•It is not turned the right way ( 
98). Turn it the right way and try inserting again.
•Turn the camcorder’s power off and back on again and remove and reinsert the card if necessary.
•The camcorder is not set to CARD CAMERA or CARD PLAY (VCR) mode ( 
101, 105).
•The memory card is not inserted ( 
98).
•You are using an SD Memory Card and it is set for erasure prevention. Change the position of the protect switch.
•The memory card is full. Erase images ( 
108) or insert a new memory card.
•The power source is not properly connected ( 
12), or the battery pack is exhausted or not properly attached ( 
13, 123).
•The function cannot be used in that recording program ( 
55).
•The memory card is not loaded ( 
98).
•You are using an SD Memory Card and it is set for erasure prevention. Change the position of the protect switch.
•The memory card is full. Erase images ( 
108) or insert a new memory card.
•You have reached the maximum file number. Set the file numbering to RESET through the menu ( 
100) and insert a new memory card.
•You are using an unformatted memory card. Format the card ( 
116).
E
Information | Additional |
