List of Messages (in alphabetical order)

CHANGE THE BATTERY PACK

-Battery pack is exhausted. Replace or

charge the battery pack ( 15).

CHECK THE CASSETTE [INCORRECT TAPE SPECIFICATION]

-You attempted to play back a tape recorded in HD (high definition) standard.

CHECK THE INPUT

-The DV cable is not correctly connected

to the DV terminal ( 39), or the connected digital device is turned off.

CONDENSATION HAS BEEN DETECTED

-Condensation has been detected in the

camcorder ( 56).

CONDENSATION HAS BEEN DETECTED REMOVE THE CASSETTE

-Condensation has been detected in the

camcorder ( 56). Remove the cassette.

COPYRIGHT PROTECTED DUBBING RESTRICTED

-You attempted to dub a copyright

protected tape ( 42).

COPYRIGHT PROTECTED PLAYBACK IS RESTRICTED

-You attempted to play back a copyright

protected tape ( 42).

HEADS DIRTY, USE LEANING ASSETTE

-Video heads are dirty. lean the video

heads ( 2).

INCORRECT TAPE SPECIFICATION PLAYBACK IS RESTRICTED

-You attempted to play back a tape recorded in a different television system (PAL or SECAM) or in a recording standard not supported by this camcorder.

INPUT SIGNAL NOT SUPPORTED

-The digital device connected with the DV cable is incompatible with the camcorder.

REMOVE THE CASSETTE

-Camcorder stopped operating to protect the tape. Remove the cassette and

reinsert it ( 21).

SET THE TIME ZONE, DATE AND TIME

-You have not set the time zone, date and time. This message appears each time you turn the power on until you set the

time zone, date and time ( 20).

TAPE END

-Tape reached the end. Rewind the tape or replace the cassette.

THE TA E IS SET FOR ERASURE REVENTION

-Cassette is protected. Replace the cassette or change the position of the

protect switch ( 55).

52 • Additional Information